Welcome, Guest. Please login or register.

Login with username, password and session length




Total Carlton > Carlton Technical > Oily Bits > Brake Pipes
Pages: [1]   Go Down
« previous next »
Print
Author Topic: Brake Pipes  (Read 382 times)
0 Members and 1 Guest are viewing this topic.
Whippit
Kirkcaldy, Fife
Global Moderator
Wanted: Life
*****
Posts: 3712


Ut olim ingenii necnon virtutis
« on: June 26, 2010, 01:00:32 PM »
Does anyone have any info as to the size of the brake pipes on the carlton?
Logged
chrismec
Wanted: Life
******
Posts: 2655


Poole Dorset
« Reply #1 on: June 26, 2010, 01:44:52 PM »
As far as I know they are all the same size, I think it's 3/16. But if you go to a factors and ask for copper brake pipe they will give you the normal one  Smiley
Logged
Whippit
Kirkcaldy, Fife
Global Moderator
Wanted: Life
*****
Posts: 3712


Ut olim ingenii necnon virtutis
« Reply #2 on: June 26, 2010, 03:45:58 PM »
I was thinking more of the length, theres a place round here who will make them up if you tell them the sizes
Logged
chrismec
Wanted: Life
******
Posts: 2655


Poole Dorset
« Reply #3 on: June 28, 2010, 01:19:15 PM »
Quote from: Whippit on June 26, 2010, 03:45:58 PM
I was thinking more of the length, theres a place round here who will make them up if you tell them the sizes

Oh I see  Embarrassed
Logged
Whippit
Kirkcaldy, Fife
Global Moderator
Wanted: Life
*****
Posts: 3712


Ut olim ingenii necnon virtutis
« Reply #4 on: July 28, 2010, 11:25:45 AM »
Anyone got any more answers on this?
Logged
Land-Barge
Wanted: Life
******
Posts: 1011


3 litre armchair special
« Reply #5 on: July 28, 2010, 01:13:42 PM »
Your best bet is to take them off and measure them as you make the new pipes up, had a brake pipe go on the rear trailing arm the other day, took it off and got a mate to make a new one, he just copied the bends onto the new pipe to get the corect length, fitted perfectly.
Logged
Whippit
Kirkcaldy, Fife
Global Moderator
Wanted: Life
*****
Posts: 3712


Ut olim ingenii necnon virtutis
« Reply #6 on: July 28, 2010, 04:39:00 PM »
Yep I reckon thats going to be the answer Wink
Logged
Pages: [1]   Go Up
Print
« previous next »
 
Jump to:  

Valid XHTML 1.0! Powered by SMF 1.1.16 | SMF © 2011, Simple Machines | Locale by Crip Valid CSS!